Numarator preset FS218

Alimentare: 24/110 VAC ±10 % (50/60 Hz)
230 VAC +6/-10 % (50/60 Hz)
24 VDC ±10 %

Housing: Built-in housing

Caracteristici: Large design series
Front 144 x 72 mm
Subtracting

Comanda produselor se realizeaza online, completand formularul de comanda.
Plata se efectueaza cu numerar, cu ordin de plata sau cu fila CEC. In functie de client, cantitate sau produs, modalitatea de plata poate varia.
Produsele comercializate de catre Sincro Systems au garantii. Perioada de garantie difera in functie de tipul de produs comandat.Service-ul din perioada de garantie se asigura la sediul firmei Sincro Systems, dar se poate efectua si la sediul clientului, cu plata deplasarii.
Produsele comandate se ridica de la sediul firmei noastre sau se livreaza la adresa solicitata de client, prin firme de curierat. Plata transportului se efectueaza de catre client, dar la cererea acestuia, plata se poate face de catre furnizor, contravaloarea transportului adaugandu-se facturii bunurilor livrate.

Informatii Produs:

Technical data – electrical ratings

Voltage supply	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %
Ripple residue	<48 %
Nominal frequency	50 / 60 Hz
Pulse ratio	1:1
Service life	100 million impulses Electric reset operations: Approx. 1 million
Preset	1 preset
Output contact	Change-over contact by micro-switch, one-pole
Switching voltage	230 VAC / VDC
Switching current	2 A (VAC) 1 A (VDC)
Switching capacity	100 VA / 30 W
Limit switch service life	1 million switching cycles
Spark extinguisher	Recommended for inductive load
Standard DIN EN 61010‑1	Protection class II Overvoltage category II Pollution degree 2
Emitted interference	DIN EN 61000-6-3
Interference immunity	DIN EN 61000-6-2
Approval	CE conform

Technical data – mechanical design

Display	White numbers on black
Number of digits	5-digits
Digit height	8 mm
Count mode	1 impulse = 1 count
Step-by-step switching	Subtracting in 2 half steps
Measuring range	99 999
Reset	Manual by button to preset
Operating temperature	0…+60 °C
Storing temperature	-20…+70 °C
Relative humidity	80 % non-condensing
Protection DIN EN 60529	IP 41
Housing type	Built-in housing
E-connection	Plug-in terminal connector, 10-pin
Mounting	Front panel with 4 screws
Dimensions W x H x L	144 x 72 x 129 mm
Cutout dimensions	113 x 61 mm (+0.5)
Installation depth	129 mm
Weight approx.	650 g
Material	Housing: Hostaform POM, black