Numarator de timp BE134

Alimentare: 22…50 VAC (50/60 Hz)
85…265 VAC (50/60 Hz)
12…30 VDC

Housing: Built-in housing

Caracteristici: 2 preset
4 time ranges
Interface RS485

Comanda produselor se realizeaza online, completand formularul de comanda.
Plata se efectueaza cu numerar, cu ordin de plata sau cu fila CEC. In functie de client, cantitate sau produs, modalitatea de plata poate varia.
Produsele comercializate de catre Sincro Systems au garantii. Perioada de garantie difera in functie de tipul de produs comandat.Service-ul din perioada de garantie se asigura la sediul firmei Sincro Systems, dar se poate efectua si la sediul clientului, cu plata deplasarii.
Produsele comandate se ridica de la sediul firmei noastre sau se livreaza la adresa solicitata de client, prin firme de curierat. Plata transportului se efectueaza de catre client, dar la cererea acestuia, plata se poate face de catre furnizor, contravaloarea transportului adaugandu-se facturii bunurilor livrate.

Technical data – electrical ratings

Voltage supply	22…50 VAC (50/60 Hz) 85…265 VAC (50/60 Hz) 12…30 VDC
Power consumption	5 VA 5 W
Sensor supply	AC: 24 VDC ±20 % / 100 mA DC: 9…28 VDC / 100 mA
Display	LCD, 7-segment display, 2-lines, backlit
Number of digits	6-digits 8-digits – totalizer in 2 steps
Digit height	7 mm (count) 4 mm (preset)
Function	Hour counter Main counter with 2 presets
Count mode	Adding or subtracting
Counting frequency	Batch counter: approx. 20 Hz
Operating mode	Time meter and hour counter
Data memory	>10 years in EEPROM
Reset	Button, electric or automatic
Keylock	Yes, electric (keylock)
Outputs electronic	Optocoupler
Outputs relay	Normally open or closed, programmable
Output holding time	0.01…99.99 s
Interface	RS485
Standard DIN EN 61010‑1	Protection class II Overvoltage category II Pollution degree 2
Emitted interference	DIN EN 61000-6-4
Interference immunity	DIN EN 61000-6-2
Programmable parameters	Measuring units, sensor logic Control inputs
Approvals	UL/cUL CE conform

Technical data – mechanical design

Operating temperature	0…+50 °C
Storing temperature	-20…+70 °C
Relative humidity	80 % non-condensing
E-connection	Plug-in screw terminals
Core cross-section	1.5 mm²
Protection DIN EN 60529	IP 65 face with seal
Operation / keypad	Membrane with softkeys
Housing type	Built-in housing
Dimensions W x H x L	48 x 48 x 100 mm
Installation depth	100 mm
Mounting	Clip frame
Cutout dimensions	45 x 45 mm (+0.6)
Materials	Housing: Makrolon 6485 (PC) Keypad: Polyester
Weight approx.	150 g