Encoder absolute singleturn GA241 - parallel

Rezolutie maxima: ST 8192 / 13 bit
Shaft: ø6 mm
Housing: ø58 mm
Caracteristici: Gray code

Comanda produselor se realizeaza online, completand formularul de comanda.
Plata se efectueaza cu numerar, cu ordin de plata sau cu fila CEC. In functie de client, cantitate sau produs, modalitatea de plata poate varia.
Produsele comercializate de catre Sincro Systems au garantii. Perioada de garantie difera in functie de tipul de produs comandat.Service-ul din perioada de garantie se asigura la sediul firmei Sincro Systems, dar se poate efectua si la sediul clientului, cu plata deplasarii.
Produsele comandate se ridica de la sediul firmei noastre sau se livreaza la adresa solicitata de client, prin firme de curierat. Plata transportului se efectueaza de catre client, dar la cererea acestuia, plata se poate face de catre furnizor, contravaloarea transportului adaugandu-se facturii bunurilor livrate.

Technical data – electrical ratings

Voltage supply	10…30 VDC
Reverse polarity protection	Yes
Consumption w/o load	≤60 mA (24 VDC)
Initializing time (typ.)	20 ms after power on
Interface	13 parallel outputs
Steps per turn	8192 / 13 bit
Absolute accuracy	±0.025°
Sensing method	Optical
Code	Gray or binary
Code sequence	CW/CCW coded by connection
Inputs	Control signals UP/DOWN and zero STORE ENABLE
Output circuit	Push-pull short-circuit proof
Interference immunity	DIN EN 61000-6-2
Emitted interference	DIN EN 61000-6-4
Diagnostic functions	Self-diagnosis Code continuity check
Approval	UL approval / E63076

Technical data – mechanical design

Housing	ø58 mm
Shaft	ø6 mm
Flange	Synchro flange
Protection DIN EN 60529	IP 54 without shaft seal IP 65 with shaft seal
Operating speed	≤10000 rpm (mechanical) ≤6000 rpm (electric)
Starting torque	≤0.015 Nm IP 54 ≤0.03 Nm IP 65
Rotor moment of inertia	14.5 gcm²
Admitted shaft load	≤20 N axial ≤40 N radial
Materials	Housing: aluminium Flange: aluminium
Operating temperature	-25…+85 °C -40…+85 °C (optional)
Relative humidity	95 % non-condensing
Resistance	DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms
Weight approx.	250 g
E-connection	Connector or cable